Self-Adhering Electrodes 50 x 100mm - Pack of 4
Largest self-adhering electrodes we sell. Ideal for larger body areas, they can be used with Obstetric TENS if you need TENS electrodes, and are also useful for relieving pelvic pain.
Due to current supply variability we source stock from several companies and will dispatch the brand available at the time.
EMAIL US if you require hypoallergenic electrodes
Please note we cannot supply this product to a US address, any orders will be refunded
Adhesive electrodes 50x100mm
- Verity and Everyway brands - quality adhesive external electrodes
- Compatible with all electrical stimulation and EMG machines we supply
- Ideal size for Obstetric TENS use for pain relief during labour and for pelvic pain conditions
- Single person use only
Applying the electrode
- Ensure that the stimulation device is switched off prior to applying or removing the electrode, and disconnect the wire from the stimulation device.
- Apply electrode only to unbroken skin. Clean the area where the electrode is to be applied with soap and water. Rinse and dry.
- With the electrode still on the liner, attach the unattached lead wire from stimulation or EMG device to the electrode connector.
- Remove the electrode from liner by gripping the edge of the electrode and peeling it gently off the liner. Keep the liner for storing the electrode after use.
- DO NOT pull electrode from backing by the wire lead as you will damage it.
- Place the electrode on the required location by applying the centre of the electrode first and smoothing down to the edges.
- Finally, attach the lead wire to stimulation device.
Removal
- Turn off the stimulation device and disconnect the lead wire from the device.
- Remove the electrode from skin by peeling from electrode edge.
- Place back on to liner.
- DO NOT remove by pulling on the lead as you will damage it.
Re-Application and Storage
- Between uses, return the electrode to the liner and store in the resealable bag in a cool dry place out of direct sunlight.
Electrode life / longevity
- The life of the electrode varies depending on skin conditions, skin preparation, type of stimulation, storage, and climate.
- Under normal use you should get 20-30 applications.
- For best results store adhesive electrodes in the fridge
- If losing stickiness- apply a drop of water in middle of electrode and wipe it over surface, air dry and then use - it should regain some stickiness/adhesion
- REPLACE if full surface of electrode won't stick to skin, or if it falls off easily during use.
- ** The stimulation will only be emitted via the area if electrode that adheres to skin, if the full area is not adhered, the electrical current will be concentrated over a smaller surface area and may cause skin irritation
View our video about electrodes where our physiotherapist Fiona explains how to choose and use an electrode
| Specifications | Self-adhering external electrodes : 4 per pack : 50mm x 100mm
|
|---|---|
| Video |
Self-adhering external electrodes : 4 per pack : 50mm x 100mm
- Soft white cloth backing, suitable for most areas of the body
- High quality hydrogel and conductive carbon film
- Water based gel makes it skin friendly and allergy free (exclusions possible do a skin test first if prone to allergic reaction to adhesive)
-
Do not use alcohol wipes or other liquids to clean the front or gel side of the electrodes!
-
Latex free
-
CE marked
